

Place of Origin:China
Certification: ISO9001-CE
Tel:0086-577-88775569
Fax:0086-577-88781901
-
INTRODUCE
IMM Series Plastic Injection Molding Machine is our latest product manufactured with the most advanced technology and tens of years of experience. All of its hydraulic and electric components purchased from renowned suppliers, plus elaborate design and production, enable the machine to have perfect performance, which appealed to users as soon as it was introduced into the market.Features
(1) Screw of a large L/D ratio and adjustable backpressure ensure plasticizing quality and capacity.
(2) The screw is directly driven by a low-speed, high-torque, radial piston hydraulic motor, applying to all kinds of plastics.
(3) Multi-stage injection speed and holding pressure apply to various complicated molds and processing requirements.
(4) High strength mould plate and double-toggle five-point clamping mechanism, rapid and smooth mould-moving, reliable mould-locking.
(5) Large mould can be accommodated due to the increase of the mould opening stroke, the mould thickness and the space between the tie bars.
(6) Low-pressure, low-speed clamping protection device and the alarms for various faults.
(7) High strength tie bars with perfect rigidity and endurance. ITEM IMM-80 IMM-120 IMM-138 IMM-168 IMM-200 IMM-288 IMM-328 IMM-368 INJECTION PART Screw diameter mm 38 40 42 48 55 60 65 75 Screw L/D ratio L/D 19 20.5 22.3 21.7 18.9 22.2 21.5 17.5 shot size(theoretical) cm3 180 128 276 410 560 906 995 1180 Shot weight g 162 205 248 369 505 815 896 1060 injection pressure Mpa 148 159.5 174 149.5 152 154 144 140 injection rate g/s 110 100 134 160 188 240 290 375 Plasticizing capacity g/s 17.2 17.5 20 24 27 40 42 37 Screw speed rpm 200 220 200 180 180 190 190 160 CLAMPING PART Clamping force KN 80 1200 1380 1680 2000 2880 3280 3680 Toggle stroke mm 300 32 340 385 400 495 500 580 Mould thickness mm 120-380 150-410 150-420 200-400 250-450 520×210 600×220 270-650 Space between tie-bars mm 355×315 390×355 430×388 420×420 480×460 577×519 580×580 650×650 Ejector stroke mm 80 90 135 90 90 125 125 125 Ejector tonnage KN 30 35 62 45 50 70 80 85 OTHER PART Heating power KW 6.43 7.45 8.2 9.65 10.65 17.4 17.4 16.1 Max. pump pressure Mpa 16 16 16 16 16 16 16 16 Pump motor power KW 9—11 11—13 15 15 18.5 25 30 37 Machine size m 3.7×1.3×1.7 4×1.6×1.7 4.7×1.7×1.8 5.1×1.7×2 5.3×1.7×2 6.2×2.0×2.2 6.3×2.0×2.5 6.4×2×2.7 Weight T 2.6 3.5 4.2 6.2 6.8 9.1 10 11.5 ITEM IMM-388 IMM-398 IMM-428 IMM-528 IMM-628 IMM-1000 IMM-1250 INJECTION PART Screw diameter mm 73 75 78 85 95 120 120 Screw L/D ratio L/D 21.2 20 21.5 21 19 19.7 24 shot size(theoretical) cm3 1438 1485 1810 2418 3400 5788 6333 Shot weight g 1290 1351 1630 2200 3060 5210 5763 injection pressure Mpa 160 173 156 167 143 156 173 injection rate g/s 358 395 395 482 632 940 956 Plasticizing capacity g/s 50 65 48 78 87.8 120 128 Screw speed rpm 180 0-165 160 0-150 134 110 0-95 CLAMPING PART Clamping force KN 3880 3980 4280 5280 628 10000 12500 Toggle stroke mm 630 700 655 820 780 1050 1300 Mould thickness mm 660×270 720×720 730 810×810 860 680×1350 1260×1260 Space between tie-bars mm 700×659 280-800 760×720 350-820 860×819 1090×1350 400-550 Ejector stroke mm 150 160 280 210 220 310 400 Ejector tonnage KN 85 110 170 150 160 210 260 OTHER PART Heating power KW 17.5 16 25.56 16 37.1 66.35 16 Max. pump pressure Mpa 16 37 16 55 16 16 55+55 Pump motor power KW 37 19.9 37 33 25+30 90 85.25 Machine size m 6.5×2.1×2.7 7.1×1.9×2.5 7.3×2×2.8 8.4×2.2×2.9 9.0×2.4×2.9 11.7×2.8×4.1 14.3×2.8×3.5 Weight T 13.8 15.7 17 23 26 52 65
* Subject: | ||
* Message: | ||
* Contact: | ||
* Email: | ||
CompanyName: | ||
* Phone: | ||
Fax: | ||
Address: | ||